HomeOrderingContact UsAbout UsInvestor InformationSite Map

WAVE Optimized® Buffers

Description Ordering Warranty
 
 

WAVE Optimized Buffers

WAVE Optimized Buffers® were specifically developed to provide highly reproducible retention times with WAVE® System instrumentation. WAVE Optimized Buffers have a longer shelf life than buffers prepared from concentrate. They will allow you to generate reproducible data from day to day, week to week, system to system and lab to lab. Not only will they save you time, but reduce problems with water quality and maintenance of purification systems.

WAVE Optimized Buffers are made in dedicated tanks under scrupulously controlled conditions to ensure clean baselines and long shelf life. For accuracy and consistency, all measurements are performed gravimetrically rather than volumetrically. Most alternative buffers are made in small batches, which typically leads to variations. For example, foreign particles in the volumetric flask can contaminate the buffer, evaporation can affect the concentration of acetonitrile, and fluctuations in temperature can change the volume of the buffer. The possibility of contamination is also higher from non-certified sources of de-ionized water. WAVE Optimized Buffers are designed and prepared with optimal reagents and conditions to eliminate these problems.

Features
  • Measurements are done gravimetrically to ensure correct concentrations of TEAA and acetonitrile
  • Manufactured with the purest chemicals in a metal-free and and clean environment
  • Bottles are conveniently shaped and sized allowing the neck of the WAVE Optimized Buffer bottles to fit exactly into the WAVE System cap
Benefits
  • Highly reproducible retention times from batch to batch
  • Clean baseline and long shelf-life
  • Eliminates buffer transfer - just open the bottle and connect it to the WAVE System
  • Minimizes operator exposure to acetonitrile
  • Decreases evaporation of acetonitrile - a common cause of batch-to-batch variation in laboratory made and other purchased buffers

Repetitive Injections

Figure 1. Repetitive WAVE™ Low-Range Mutation Standard Injections (10 µL)
Retention time, resolution of the heteroduplexes and resolution of the homoduplexes were similar in all cases.

WAVE Buffers Product Specification Sheet - Click here

Contact WebmasterSend Page To ColleaguePrintable PageChange Country United States
Copyright © 1997-2008 Transgenomic, Inc., All Rights Reserved.the power of discovery™